 |
 |
 |
Pyrographic
Equipment Manufacturing
Proudly designed and produced in
Australia.
|
|
|
Hi-Tech Pyrography is here at
last.
Welcome to our innovative, new range of hot-wire, wood etching tools.
FEATURING
* Unique, turned, wooden pen handle, to reduce
heat build-up and allow a longer etching time *
* A choice of two pen handle designs,
both of which are illustrated on this page *
* Supplied with three nibs and full
instructions on how to make your own *
* A 12 month written warranty and a
comprehensive set of instructions *
* A FREE complimentary three-hour
lesson, (within the Melbourne, metropolitan area) *
The ND1 Pyro-pen
This tool incorporates 5 heat settings, and a safety red neon
indicator which warns you of the hot nib (machine is in operation). It comes complete with
a 3-metre power cord and a 1.5 metre, flexible, pen cord. There are rubber feet on the
underside of the powder-coated, steel box, to protect delicate surfaces. A convenient
carry handle is installed on the top of the box, along with two, plastic coated, spring
steel, pen storage clips.
The Dual ND1 Pyro-pen
This new product is the ultimate, top-of-range pyrography
tool, which allows you the flexibility to instantly change over from one pen to the other.
The changeover facility is a switch on the front panel, which alternates the power.
Different styles of nibs can be installed in each pen, allowing quick selection, without
having to screw in new nibs (as you would for the single pen).
The
Transportable Pyro-pen 
This new design incorporates most of the facilities in the previous models, except that it is designed to be used exclusively in a car, 4wd, or similar vehicle. It plugs directly into the cigarette lighter socket of your vehicle or into a car battery, and is designed to work either in a 12-volt or a 24-volt system. The electronics is also capable of accepting either a positive or a negative earthed system, which caters for all vehicles, both modern and older types. This transportable model uses less power than your parking lights.
These tools are proudly designed and produced in Australia by
Pyrographic Equipment Manufacturing, of Kilsyth, Victoria. Along
with manufacturing these tools we also offer the following services:
· Free, quality pyrography art consultancy.
· Free advice given over the phone on all matters of tool usage.
· Servicing and modifications to most makes of hot-wire wood etching tools.
· Installation of our wooden pen handles onto existing machines.
· Tuition on pyrographic artistry for small workshop groups (within a 50-Km
radius of Melbourne).
These tools are suitable for use on all types of timber (except treated or previously varnished or polished wood) and can also be used on leather (in a ventilated area) as well as numerous other materials.
The tools are all very reasonably priced and extremely user-friendly, for all users from beginners to advanced.
As a safety feature for the user, a fuse is installed in each of our tools, to prevent overloading.
All our tools are available through retail outlets across Australia.
The photographs below are examples of pyrographic art:
 |
 |
At this point in time we are only handling trade enquiries from within Australia.
For trade, general or further inquiries, please contact:
Pyrographic Equipment Manufacturing
phone/fax: 03 9724 9320
This page was last modified: Tuesday, 26 November 2002